In recent years, due to the use of shotcrete machine and wet shotcrete machine, the dust concentration near the machine and outside the nozzle has been greatly reduced, which has eliminated the harm to workers' health; and wet shotcrete machine has high productivity and low rebound rate. So what are the cleaning methods of wet shotcrete machine and how to do it?
Cleaning method after wet shotcrete machine:
(1) After each operation of shotcrete machine, all the pipes and hoppers and piston cylinders must be cleaned.
(2) Open the lower door of the hopper, close the lower door after cleaning the concrete in the bucket, and fill the cleaning ball with water in the pipe until the cleaning ball and cleaning water flow out.
(3) Remove all pipes and rinse with water until clean
(4) Open the lower door of the wet shotcrete machine, rinse with water, start the reverse pump switch, and rinse the discharge port with water.
We all need to master the daily cleaning and plugging methods of wet shotcrete machine. Only by knowing the methods and cleaning methods of plugging pipes of shotcrete machines can we better maintain and maintain.
