During the use of the shotcrete machine, we found that the production capacity of the machine has decreased. How should we solve this situation?
There are three reasons for the reduction in the production capacity of the shotcrete machine:
1. Blockage due to material adhesion
2. The valve of the gas circuit is turned wrong (the pressure drop is too large)
3. The hopper is not full
The solution for reducing the production capacity of the shotcrete machine:
1. The opening of the rotor material cavity or discharge elbow is reduced due to the material blocking 2, the gas valve is turned wrong (the pressure drop is too large): reduce the pressure loss and increase the useful pressure.
3. The hopper is not full, the hopper should always be fully filled, and the vibration capacity should be enhanced
