If the shotcrete machine is not properly handled after the spraying is finished, it will not only affect the service life of the spraying machine, but also whether the next spraying work can proceed smoothly. I hope that the majority of spraying machine operators will take it seriously. How to deal with the shotcrete machine after the completion of the slurry, the author believes that the following order should be mainly followed:
1. Stop feeding
Stopping feeding is to stop feeding materials into the shotcrete machine, and consume the remaining material in the shotcrete machine and pipeline under normal operation of the shotcrete machine.
2. Inject clean water
The purpose of injecting clean water is to flush the remaining slurry in the spraying machine and the pipeline, so as to avoid the phenomenon of pipe blockage when it is used next time.
3. Stop water injection
Stop water injection on the premise that the shotcrete machine and pipelines are cleaned, and use the strong wind pressure of the shotcrete machine to flush out the remaining water in the shotcrete machine and pipelines.
4. Stop power supply
The power supply can be disconnected to stop the operation of the shotcrete machine and the water in the pipeline is completely rinsed.
5. Organize equipment
Recycle the shotcrete machine and related supporting facilities in an orderly manner, stack them neatly, and lay a good foundation for the next use.
The above is the discussion on how to deal with the spraying machine after the spraying is finished. I hope that the author's discussion can help you to operate the spraying machine in the future.
