Maintenance of shotcrete machine washing thread: the water in the washing tank should be changed once a day, and the washing brush should be cleaned once a week (can be washed with warm water at 40°C). In addition, according to different slurries, some need to use warm water, and some need to use solvents to wash the thread. The warm water can be connected to the steam pipe to the water tank to use steam to heat it.
The standard to measure whether the washing line is clean is to see whether the washed line has become thicker, if it does not become thicker, it proves that the line washing is normal.
Control of the temperature of the drying box: The control of the temperature of the drying box is realized by the switch of the steam valve driven by the temperature sensor. The user can set the required temperature on the thermostat to achieve automatic constant temperature.
Lubrication: Lubricating oil should be added to each bearing part of the whole shotcrete machine once a week, and the lubricating oil of the reducer must be replaced every 6 months.
