ban
Position:Home  /  Industry Info  /  Special safety technical measures for the use of Shotcrete Machine

Special safety technical measures for the use of Shotcrete Machine

Date:2019-10-22     Label:

Shotcrete Machine

Gunite Machine

The shotcrete machine is a new type of high-efficiency shotcreting machine, which is mainly suitable for concrete shotcreting of 5m*5m section roadway. It has a lot of precautions when it is used. Here is a brief introduction to the safety measures of the shotcrete machine.

Preparation before shotcrete:

1. Check the blast pipe for shotcrete for air leakage and water running, and handle it in time.

2. Check the wear of the pipeline, and find any problems in time to repair or replace.

3. The conveying pipeline should be smooth, and there should be no dead bends or hard bends to prevent blockage of the pipeline or serious damage to the pipeline.

4. Check and clean up the debris in the silo.

5. Whether the sealing parts are tight and whether the valves leak or leak.

6. Is the pressure gauge normal and flexible.

7. Whether the gearbox and each bearing are short of oil.

8. Whether the motor and each transmission component are operating normally.

+

+

Please leave a message
skype
message