Our China Coal Group mainly produces dry shotcrete machine and their accessories. Maybe many of you do n’t know this dry shotcrete machine too much. Here I will tell you, now everyone knows that if the dry shotcrete machine works for too long, you need to maintain the shotcrete machine properly, because It can improve the working efficiency of the machine. Another important point is that it can extend the service life of dry shotcrete machine.
Let me talk about the maintenance and maintenance of dry shotcrete machine:
1.Maintenance and maintenance of dry shotcrete machine board:
(1) We need to sort out and check the pressing force applied to this rubber plate before the sprayed concrete starts operation.
(2) We need to clean the surface of this rubber plate and its steel lining plate when we need to use this shotcrete machine after the operation is completed.
(3) Also, the material cavity of the rotor body and the taper sleeve of the outlet are mainly made of this anti-adhesive material. It can be said that generally it will not be bonded, but when this is over, we should open the rotor. Body and its discharge cone sleeve to further check whether the material of the shotcrete machine sinks and we can clean it up.
2.The dry shotcrete machine reducer is maintained and maintained as:
(1) After each operation of the dry shotcrete machine, it is necessary to immediately clean up the foreign materials such as the adhering materials adhered to the surface of the shotcrete machine.
(2) Observe the oil level in the reducer before starting the dry shotcrete machine. If it is insufficient, it should be replenished immediately.
(3) When the reducer is working, the temperature rise must not be greater than 60 ° C, and there must be no abnormal vibration or noise. If necessary, stop the inspection and repair immediately.
