How to effectively clean the hydraulic concrete wet mix shotcrete machine after use?
1. After each shotcrete work of the shotcrete machine, all the pipelines of the wet shotcrete machine, the hopper of the pump and the piston cylinder must be cleaned, and no place should be left out.
2. Open the lower door of the hopper of the wet shotcrete machine pump to clean the concrete in the hopper; then close the lower door, fill up with water, and then plug the cleaning ball into the pipe to draw water until the cleaning ball and clean water flow out.
3. Remove all lines of the shotcrete machine and rinse with water until clean.
4. Open the discharge lower door of the wet shotcrete machine, rinse with water, start the reverse pump switch, rinse the discharge port with water, and clean the pump S swing tube.
The above, it is easy to complete the cleaning work after the wet mix shotcrete machine is used.
