At present, with the continuous extension of technology, many products have undergone earth-shaking changes. However, the emergence of spray guns has contributed a lot to society and helped many people. There are many types of spray guns, which are divided into wet spray gun And dry shotcrete machine, and what we are talking about today, dry shotcrete machine, it is well known that the shotcrete machine has a wide range of applications in construction engineering machinery, so it has attracted people ’s attention, then today the shotcrete machine manufacturer introduces it Knowledge of the use of dry shotcrete machine.
When the dry shotcrete machine is ready, it is necessary to make preparations in advance. First, check whether the circuit contacts of the electric control system are solid and whether there is leakage. Then, observe the oil level, check whether the oil in the reducer is sufficient, and check the machine. Whether part of the joint is tightened correctly and reliably. After all these checks, first run the machine briefly to grasp the operation of the machine. Finally, check the clamping force applied to the rubber sealing plate. First move the nut wrench on the clamping device rod, press it initially, and then tighten it 2-3 times until the sealing plate does not leak air. The degree can be checked in one of two ways.
