Shotcrete machine accessories mainly include: spraying pipe, nozzle, steel lining board, cone sleeve, rubber plate and so on, so how to properly choose the shot blasting machine accessories?
Selection method of shotcrete tube of shotcrete machine. Shot blasting pipe is the main pipeline for transporting slurry, and its quality will reduce the loss of slurry, and it is also a major accessory to improve work efficiency. In the selection, you should ask whether the manufacturer is made of high-wear-resistant synthetic rubber and nanometer materials, and investigate the inner and outer layers of the shot tube section to see if a steel wire reinforcement layer and a corrosion-resistant outer rubber layer have been selected. If they all fit, you can purchase attentively. If you purchase the product online, you can consult the relevant manufacturers and check the relevant questions after the goods are delivered. If they do not match, you can return them to avoid unreturnable goods due to use.
The selection method of shotcrete machine nozzle. When selecting the nozzle, you should choose a highly wear-resistant nozzle made of polyurethane materials. The overall color is usually yellow and transparent. The light can be investigated on the outside of the nozzle through the light and translucent. When in doubt about the details, you should inquire the manufacturer before purchasing.
Selection method of steel liner for shotcrete machine. When selecting the steel lining board, pay attention to the tightness of the upper and lower grinding plates, because the wear is faster during use, so when selecting the steel lining board, you must pay attention to whether the product is made of high manganese steel or stainless steel, because these two materials Both have high abrasion resistance. Selection method of spray gun cone. The taper sleeve is usually made of polyurethane material, which has the characteristics of wear resistance, compression resistance, and is not easy to break. When purchasing the taper sleeve, fold it by hand to see if the crease shows small cracks. If it is displayed, it indicates that The quality of the product is not enough, and the wear resistance is not good. It is recommended not to purchase this type of product. When the excellent cone sleeve is lightly folded by hand, the crease will not show small crevices, and the crease will gradually disappear after recovery and will not deform.
